The metallographic structure is refined and the final performance of the product is established during the critical stage of aluminum processing, known as off-line heat treatment. The three core units that condition tooling and finished profiles beyond the extrusion line are supplied by ELIK.
- Extrusion dies are preheated in die ovens prior to being placed on the press. The die's life is measurably extended by the controlled, uniform heating that brings it to a temperature that is compatible with the hot billet and the extrusion process. This alleviates internal thermal stress and prevents the cracking that is caused by an abrupt cold-to-hot shock.
- The extruded profile is age-hardened in ageing furnaces. The T5/T6 temper is achieved by the alloying elements in solid solution precipitating as reinforcing phases, such as Mg₂Si, after being held in a controlled temperature field for several hours. This process provides the profile with its intended mechanical strength and rigidity.
- Anneal ovens are used to anneal aluminum that necessitates additional cold working or specific structural properties. Residual internal working stress is completely eliminated through controlled ramp-up, soak, and slow cooling, resulting in a reduction in hardness and an increase in ductility and toughness.
Collectively, these units finalise the metallurgical process that the extrusion and quench phases initiate, transforming a formed profile into a finished product that satisfies the necessary workability, stability, and temper.




