Video
Jiangsu Yahao Aluminum Co., Ltd.
  • Jiangsu Yahao Aluminum Co., Ltd.
  • Jiangsu Yahao Aluminum Co., Ltd.
  • Jiangsu Yahao Aluminum Co., Ltd.
  • Jiangsu Yahao Aluminum Co., Ltd.
  • Background: A company specialising in lightweight aluminum for photovoltaics and energy storage was experiencing excessive energy usage, uneven temperature distribution across equipment and workshops, unreliable yield, and inconsistent product quality.
  • Equipment supplied: 22 units in the 700T-4500T range.
  • Target products: photovoltaic components, new-energy car parts, battery trays, and sunroof rails.
  • Solution: Based on precise temperature control, intelligent energy management, full-line uniformity, and quality improvement, delivered through a four-part upgrade; hardware, system optimisation, process standardisation, and intelligent control addressing the three core issues of temperature deviation, energy waste, and quality fluctuation.
  • Result: The billet heating furnaces and ageing furnaces use mature temperature-control technology with low control error and even in-chamber distribution, reducing quality issues associated by temperature variations. High thermal efficiency reduces running energy consumption, achieving a balance between production stability and cost efficiency.
Video
Hubei Liming Aluminum Technology Co., LTD.
  • Hubei Liming Aluminum Technology Co., LTD.
  • Hubei Liming Aluminum Technology Co., LTD.
  • Hubei Liming Aluminum Technology Co., LTD.
  • Hubei Liming Aluminum Technology Co., LTD.
  • Background: An aluminum profile developer, producer, and deep-processor specialising in new energy, PV modules, automotive parts, industrial profiles, and aerospace aluminum components, with high energy consumption, uneven temperature distribution, and quality fluctuations.
  • Equipment supplied: 10 multi-log (135-billet) furnaces and five ageing furnaces.
  • Target products: Solar frames, produced on a 250T press. Line designed for 80,000 tonnes annual capacity.
  • Solution and Results: After implementing ELIK's temperature-control and energy-saving technology, the line was fully optimised: energy consumption was lowered, temperature was uniform and stable throughout the line, and earlier process flaws were corrected. Running at a maximum capacity of 80,000 tonnes, overall product quality improved significantly. An automated logistics system automates profile stacking and basket loading to enable a low-labor production paradigm. The five 18-basket ageing furnaces have enough heat-treatment capability to handle ordinary production and order increases.
Video
Ningbo Huangjia Aluminum Co., Ltd.
  • Ningbo Huangjia Aluminum Co., Ltd.
  • Ningbo Huangjia Aluminum Co., Ltd.
  • Ningbo Huangjia Aluminum Co., Ltd.
  • Ningbo Huangjia Aluminum Co., Ltd.
  • Background: An export-oriented corporation specialising in industrial aluminum profiles and aluminum-alloy furniture.
  • Equipment supplied: 7 full lines in the 700T-3000T range.
  • Target products: aluminum tubes, aluminum bars, automotive profiles, heat sinks, and motor housings.
  • Solution: ELIK unified and fixed standard production temperature curves, ramp rates, soak durations, and operating parameters across seven lines of different tonnages, resulting in a complete standardised process library that resolved quality variation caused by inconsistent machine parameters and manual ad-hoc adjustment, as well as unifying process and quality standards across the entire 700T-3000T range.
  • Result
    Energy savings: Tonnage-differentiated energy control across all seven lines provided precision consumption control for both large and small equipment, significantly cutting total plant energy consumption and long-term operating costs.
    Uniform, stable, unified temperature: The uneven temperature fields, wide gradients, and poor stability across varied tonnage equipment have been resolved; all seven lines now run at a uniform, controllable, consistent temperature that meets high-precision volume-production standards.
    Higher overall quality: Batch consistency across the seven primary lines increased dramatically, temperature-related faults were largely eliminated, and full-line yield improved significantly.
Video
Dihang - Cambodia (Dingfeng Aluminum)
  • Dihang - Cambodia (Dingfeng Aluminum)
  • Dihang - Cambodia (Dingfeng Aluminum)
  • Dihang - Cambodia (Dingfeng Aluminum)
  • Dihang - Cambodia (Dingfeng Aluminum)
  • Dihang - Cambodia (Dingfeng Aluminum)
  • Dihang - Cambodia (Dingfeng Aluminum)
  • Background: Jiangsu Dihang Industrial Technology Co., Ltd. specializes in full-chain R&D, manufacturing, and exporting metal safety protection and new-energy lightweight alloy goods. Installation at Dingfeng Aluminum in Cambodia.
  • Equipment supplied: 19 units ranging from 1100T to 2000T: 8 multi-log furnaces, 3 ageing furnaces, and 8 die ovens.
  • Target products: Photovoltaics, new-energy automotive.
  • Solution: Dealing with high energy consumption, uneven temperature, profile distortion, unstable strength, and low yield. PV and new-energy aluminum parts necessitate very tight control over temperature difference, cooling rate, and ageing soak stability whereas typical architectural profiles allow for slack tolerances, industrial material can be rejected with a 1°C deviation.
  • Result
    Energy: Waste-heat recovery combined with sealed insulation at all three high-consumption phases (billet heating, die pre-heat, and profile heat treatment) resulted in a 20-38% overall line energy savings, significantly lowering gas and electricity costs per tonne.
    Temperature: Precise control from billet to die to finished-product treatment, with low gradient throughout, to eliminate distortion, underfill, and property stratification caused by uneven heating and cooling.
    Quality: Improved straightness, surface appearance, hardness/strength, and dimensional stability; scrap rate significantly decreased to meet high-end PV and new-energy-vehicle industrial aluminum standards.
    Production: Continuous automated batch production reduced die wear, downtime for die maintenance, and rework, increasing output while decreasing labour costs.
Video
Global Aluminum — Tanzania
Global Aluminum — Tanzania
  • Global Aluminum — Tanzania
  • Global Aluminum — Tanzania
  • Global Aluminum — Tanzania
  • Global Aluminum — Tanzania
  • Global Aluminum — Tanzania
  • Global Aluminum — Tanzania
  • Background: A prominent Tanzanian aluminum extrusion maker, specialising in architectural aluminum with certain PV/industrial profiles. It manufactures its own building doors/windows and PV-bracket profiles, and the entire line is equipped with ELIK heating and heat treatment equipment.
  • Equipment supplied: 13 units ranging from 700T to 1250T: 5 multi-log furnaces, 5 die ovens, and 3 ageing furnaces.
  • Target products: Architectural door/window/curtain-wall profiles (core local demand); residential windows, sliding and security doors, glass curtain walls, railings, and stair-handrail profiles; PV brackets, small PV frames, and solar-plant mounting profiles.
  • Solution: Based on East African market priorities:
    Cost: Waste-heat recovery and sealed insulation in the three high-consumption stages help to counterbalance the region's high energy expenses.
    Quality: full-chain accurate temperature control to avoid distortion, underfill, surface colour variation, hardness stratification, and subsequent deformation is critical to East Africa's export competitiveness.
    Serviceability: Stable temperature decreases die wear and repair; automated continuous production eliminates labour dependence; and equipment tolerates local voltage fluctuations for stable, low-downtime operation with standardised wear parts.
    Capacity Expansion: Multi-log furnaces increase extrusion front-end capacity, while ageing furnaces reduce batch cycle time, aligning with the plant's PV-profile expansion alongside its mainstream door/window products, which serve both the Tanzanian market and export to Kenya, Uganda, and other East African markets.
  • Result
    Cost: 40-60% overall energy savings across the three high-consumption phases, compensating Tanzania's high energy costs; significant reduction in total production cost per tonne of aluminum, with lower die and labor/repair consumables spent.
    Quality: Full-chain precise temperature control from raw billet to finished-product treatment; reduction in common defects (distortion, underfill, colour variation, uneven hardness, later deformation); scrap rate reduced by more than 70%, giving PV and architectural export material a quality advantage over local peers.
    Capacity: Faster multi-log front-end feed and shorter ageing batch cycles promote extrusion-line development; PV-bracket capacity has increased by more than 30%, allowing the facility to take on East African solar-infrastructure orders.
    Serviceability: Equipment adapts to Tanzania's unpredictable voltage circumstances; high automation and few fault locations reduce operator difficulty; standardised worn parts simplify international after-sales maintenance for dependable long-term output.
Selected Customers

ELIK billet furnaces and ageing furnaces are in production at aluminum manufacturers including:

Guangdong Jma Aluminum Group
  • Ageing furnaceAgeing furnace
  • Billet furnaceBillet furnace
Guangdong Fenglu Aluminum
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Guangdong Gaodeng Aluminum
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Guangdong Weiye Group
  • Ageing furnaceAgeing furnace
  • Billet furnaceBillet furnace
Fujian Fenan Aluminum Group
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Nangui Aluminum Group
  • Ageing furnaceAgeing furnace
  • Billet furnaceBillet furnace
Foshan Zhanmei Metal
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Fuzhou Antong New Materials
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Taishan Jinqiao Aluminum Profile
  • Ageing furnaceAgeing furnace
  • Ageing furnaceAgeing furnace
Guangya Aluminum
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Fujian Minfa Aluminum
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Shandong Haomen Aluminum
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Guangdong Hesheng Aluminum
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Giant Light Alloy (Kunshan)
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Shenzhen XDS Bicycle
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Sichuan Sanxing Aluminum
  • Billet furnaceBillet furnace
  • Billet furnaceBillet furnace
Dongguan Huachang Group
  • Ageing furnaceAgeing furnace
  • Billet furnaceBillet furnace
Lanzhou Mingdi Aluminum
  • Billet furnaceBillet furnace
Dongguan Runhua Aluminum
  • Billet furnaceBillet furnace